Technical Information

Stainless Steel Chemical Properties

Grade C (Max) Mn (Max) P (Max) S (Max) Si (Max) Cr Ni Mo Nitrogen (Max) Cu/ Others
201 0.15 5.50/7.50 0.06 0.030 1.0 16.0/18.0 3.5/5.5 - - n-25 max
202 0.15 7.50/10.0 0.06 0.030. 1.0 17.0/19.0 4.0/6.0 - - n-25 max
JS- 203 0.08 9.2510.25 0.070 0.030 0.75 14.25 - 15.25 2.25 - 2.75 - - 1.60- 2.0
301 0.15 2.00 0.045 0.030 1.00 16.00 - 18.00 6.00 - 8.00 - 0.10 -
301M 0.10 4.55.5 0.060 0.030 0.75 14.50 - 15.50 6.0 - 7.0 - - 1.70- 1.90
304 0.08 2.00 0.045 0.030 0.75 18.00 - 20.00 8.00- 10.50 - 0.10 -
304L 0.030 2.00 0.045 0.030 0.75 18.00 - 20.00 8.00- 12.00 - 0.10 -
309s 0.08 2.0 0.045 0.030 1.0 22.0/24.0 12.0/15.0      
310 0.25 2.0 0.045 0.030 1.50 24.0/26.0 19.0/22.0      
310S 0.08 2.00 0.045 0.030 1.50 24.00- 26.00 19.00 - 22.00 - - -
316 0.08 2.00 0.045 0.030 0.75 16.00 - 18.00 10.00 - 14.00 2.00 - 3.00 0.10 -
316L 0.030 2.00 0.045 0.030 0.75 16.00 - 18.00 10.00 - 14.00 2.00 - 3.00 0.10 -
317 0.08 2.00 0.045 0.030 0.75 18.00 - 20.00 11.00 - 14.00 3.00 - 4.00 0.10 -
317L 0.030 2.00 0.045 0.030 0.75 18.00 - 20.00 11.00 - 15.00 3.00 - 4.00 0.10 -
321 0.08 2.00 0.045 0.030 0.75 17.00 - 19.00 9.00 - 12.00 - 0.10 Ti5 ( C + N ) Min or 0.70 max
347 0.08 2.00 0.045 0.030 0.75 17.00 - 19.00 9.00 - 13.00 - - Cb= 10x ( C Min ) or 1.00 Max
409 0.08 1.00 0.040 0.010 1.00 10.50 - 11.75 0.50 - - Ti= 6x (C+ N ) Min or 0.70 Max
409M 0.03 0.81.2 0.030 0.030 0.40.75 11.00- 12.00 1.5 max. - - Ti= 6x (C) Min or 0.70 Max
410S 0.08 1.00 0.040 0.030 1.00 11.50- 13.50 0.60 - - -
410 0.15 1.00 0.040 0.030 1.00 11.50- 13.50 0.75 - - -
420 0.35 0.50 0.035 0.015 0.50 12.00 - 13.00 0.20.3 - - -
440A 0.60/0.70 1.0 0.040 0.030 1.0 16.0/18.0 - - - -
440B 0.75,0.95 1.0 0.040 0.030 1.0 16.0/18.0 - - - -
440C 0.95, 1.2 1.0 0.040 0.030 1.0 16.0/18.0 - - - -
430 0.12 1.00 0.040 0.030 1.00 16.00 - 18.00 0.75 - - -
JSL AUS 0.08 7.08.0 0.070 0.030 0.75 15.50 - 16.50 4.25 - 4.75 - - 0.9 - 1.10
904L 0.02 2.00 0.030 0.045 1.00 19.0-23.0 23.0-28.0 - - 23.0-28.0
2205 0.03 2.00 0.030 0.020 1.00 21.0-23.0 4.5-6.5 4.5-6.5    
2207 0.030 1.20 0.035 0.020 0.30 24.0-26.0 6.0-8.0 - - 6.0-8.0
* Thickness of 1.27mm & below will have elongation of 20% min.

Stainless Steel Mechanical Properties

MECHANICAL PROPERTIES
Grade Tensile Yield %Age Hardness (Max) -
- Strength Mpa, (Min) Strength Elongation - -
- - Mpa, (Min) in 50mm - -
- - - gauge length min BHN Rb
301 515 205 40 217 95
304 515 205 40 201 92
304L 485 170 40 201 92
310S 515 205 40 217 95
316 515 205 40 217 95
316L 485 170 40 217 95
317 515 205 35 217 95
317L 515 205 40 217 95
321 515 205 40 217 95
347 515 205 40 201 92
409 380 170 20 179 88
409M 430 275 20 187 90
410S 415 205 22 183 89
410 450 205 20 217 89
420 700( max ) - 15 217 95
430 450 205 22 183 89
JSL AUS 515 205 40 217 95
JS- 203 515 205 40 217 95
301M 515 205 40 217 95

Nickel Alloy Chemical Properties

U.S.A. / GROSSBRITAINNIE- U.S.A. / GRANDE-BRETAGNE-- U.S.A. / GREAT BRITAIN
Handelsbezeichung C% Co% Cr% Mo% Ni% V% W% Ai% Cu% Nb/Cb Ta% Ti% Fe% Sonstige Autres-Other%
Designation Comercial - - - - - - - - - - - - -
Comercial designation - - - - - - - - - - - - -
Monel 400 0.12 - - - 65 - - - 32 - - 1.5 Mn 1.0
Monel 401 0.1 - - - 43 - - - 53 - - 0.75 Si 0.25; Mn 2.25
Monel 404 0.15 - - - 52.0-57.0 - - 0.05 rest/bal - - 0.5 Mn 0.10; Si 0.10;S o.024
Monel 502 0.1 - - - 63.0-17.0 - - 2.5-3.5 rest/bal - 0.5 2 Mn 1.5;Si 0.5; S 0.010
Monel K 500 0.13 - - - 64 - - 2.8 30 - 0.6 1 Mn 0.8
Monel R 405 0.15 - - - 66 - - - 31 - - 1.2 Mn 1.0; S 0.04
Hastelloy B 0.1 1.25 0.6 28 rest/bal 0.3 - - - - - 5.5 Mn 0.80; Si 0.70
Hastelloy B2 0.02 1 1 26.0-30.0 rest/bal - - - - - - 2 Mn 1.0: Si 0.10
Hastelloy C 0.07 1.25 16 17 rest/bal 0.3 40 - - - - 5.75 Mn 1.0 :Si 0 0.70
Hastelloy C4 0.015 2 14.0-18.0 14.0-17.0 rest/bal - - - - - 0..70 3 Mn 1.0 ; Si 0.08
Hastelloy- C 276 0.02 2.5 14.0-16.5 15.0-17.0 rest/bal 0.35 3.0-4.5 - - - - 4.0-7.0 Mn 1.0;Si 0.05
Hastelloy F 0.02 1.25 22 6.5 rest/bal - 0.5 - - Nb2.10 - 21 Mn 1.50;Si 0.50
Hastelloy G 0.05 2.5 21.0-23.5 5.5-7.5 rest/bal - 1 - 1.5-2.5 Nb1.75-2.5 - 18.0-21.0 Mn 1.0-2.0;p0.04;Si 1.0;80.03
Hastelloy G-2 0.03 - 23.0-26.0 5.0-7.0 47.0-52.0 - - - 0.70-1.20 - 0.70-1.50 rest/bal Mn 1.0;Si 1.0
Hastelloy N 0.06 0.25 7 16.5 rest/bal - 0.2 - 0.1 - - 3 Mn 0.40;Si 0.25;B0.01
Hastelloy S 0.02 2 15.5 14.5 rest/bal 0.6 1 0.2 - - - 3 Mn 0.50;Si 0.40;B0.0009;LA 0.02
Hastelloy W 0.06 1.25 5 24.5 rest/bal - - - - - - 5.5 Mn 0.050 ; Si 0.50
Hastelloy X 0.1 1.5 22 9 rest/bal - 0.6 - - - 18.5 - Mn 0.6; Si 0.60
Incoloy 800 0.04 - 21 - 32 - - 0.3 - - 0.4 45 -
Incoloy 800 H 0.08 - 21 - 32 - - 0.3 - - 0.4 45 -
Incoloy 801 0.05 - 20.5 - 32 - - - - - 1.1 45 -
Incoloy 802 0.35 - 21 - 32 - - 0.6 - - 0.7 45 -
Incoloy 804 0.05 - 29.5 - 41 - - 0.3 - - 0.6 25.4 -
Incoloy 805 0.12 - 7.5 0.5 36 - - - 0.1 - - rest/bal Mn 0.60;Si 0.50
Incoloy 810 0.25 - 21 - 32 - - - 0.5 - - rest/bal Mn 0.90; Si 0.80
Incoloy 825 0.04 - 21 3 42 - - - 2 - 1 30 -
Incoloy 825 Cp 0.04 - 21.5 3 42 - - - 2.2 Nb0.9 - 30 -
Incoloy 840 0.08 - 20 - 20 - - - - - - rest/bal Mn 1.0;Si 1.0
Incoloy 901 0.05 - 12.5 6 rest/bal - - 0.15 - - 2.7 34 Mn 0.24;Si 0.12;B0.015
Incoloy 901 Mod 0.05 - 12.5 5.8 rest/bal - - - - - 2.9 34 Mn 0.09;Si 0.08;B0.015
Incoloy 903 0.02 15 - - 38 - - 0.7 - Nb 3.0 1.4 41 -
Incoloy 904 0.02 14 - - 33 - - - - - 1.7 50 -
Incoloy DS 0.06 - 18 - 37 - - - - - - 42 Mn 1.0; Si 2.3
Incoloy Ma- 956 - - 20 - - - - 4.5 - - 0.5 74.4 Y2.03 0.5
Incoloy 600 0.05 - 15.5 - 75 - - - - - - 8 -
Incoloy 601 0.05 - 23 - 60 - - 1.4 - - - 14 -
Incoloy 604 0.04 - 15.8 - rest/bal - - - 0.1 Nb 2.0 - 7.2 Mn 0.20; Si 0.20
Incoloy 610 0.2 - 15.5 - rest/bal - - - 0.5 Nb 1.0 - 9 Mn 0.90;Si 2.0
Incoloy 617 0.07 12.5 22.5 9 54 - - 1 - - - - -
Incoloy 625 0.05 - 21.5 9 61 - - 0.4 - Nb 3.65 0.4 2.5 Mn 0.50; Si 0.50
Incoloy 671 0.05 - 48 - 51 - - - - - 0.35 - -
Incoloy 700 0.12 28.5 15 3.75 46 - - 3 0.05 - 2.2 0.7 Mn 0.10; Si 0.30
Incoloy 702 0.04 - 15.6 - rest/bal - - 3.4 0.1 - 0.7 0.35 Mn 0.05: Si 0.20
Incoloy 705 0.3 - 15.5 - rest/bal - - - 0.5 - - 8 Mn 0.90 ; Si 5.5

STAINLESS STEEL PIPE DIMENSION AS PER ASTM & WEIGHT-KG. PER MTR. (ANSI B36.19)

Nominal Bore Outside Diameter Sch-5S Sch-10S Sch-40S Sch-80S Sch-160S Sch-XXS
mm INCH mm Wt Weight Wt Weight Wt Weight Wt Weight Wt Weight Wt Weight
  mm (Kg/mt) mm (Kg/mt) mm (Kg/mt) mm (Kg/mt) mm (Kg/mt) mm (Kg/mt)
3 43313 10.3 1.24 0.276 1.24 0.28 1.73 0.37 2.41 0.47 - - - -
6 43191 13.7 1.24 0.39 1.65 0.49 2.24 0.631 3.02 0.8 - - - -
10 43315 17.1 1.24 0.49 1.65 0.63 2.31 0.845 3.2 1.1 - - - -
15 43132 21.3 1.65 0.8 2.11 1 2.77 1.27 3.75 1.62 4.75 1.94 7.47 2.55
20 43193 26.7 1.65 1.03 2.11 1.28 2.87 1.68 3.91 2.2 5.54 2.89 7.82 3.63
25 1 33.4 1.65 1.3 2.77 2.09 3.38 2.5 4.55 3.24 6.35 4.24 9.09 5.45
32 1.25 42.2 1.65 1.65 2.77 2.7 3.56 3.38 4.85 4.47 6.35 5.61 9.7 7.77
40 1.5 48.3 1.65 1.91 2.77 3.11 3.68 4.05 5.08 5.41 7.14 7.25 10.16 9.54
50 2 60.3 1.65 2.4 2.77 3.93 3.91 5.44 5.54 7.48 8.74 11.1 11.07 13.44
65 2.5 73 2.11 3.69 3.05 5.26 5.16 8.63 7.01 11.4 9.53 14.9 14.2 20.39
80 3 88.9 2.11 4.51 3.05 6.45 5.49 11.3 7.62 15.2 11.1 21.3 15.24 27.65
100 4 114.3 2.11 5.84 3.05 8.36 6.02 16.07 8.56 22.3 13.49 33.54 17.12 41.03
125 5 141.3 2.77 9.47 3.4 11.57 6.55 21.8 9.53 31.97 15.88 49.11 19.05 57.43
150 6 168.3 2.77 11.32 3.4 13.84 7.11 28.3 10.97 42.7 18.2 67.56 21.95 79.22
200 8 219.1 2.77 14.79 3.76 19.96 8.18 42.6 12.7 64.6 23 111.2 22.23 107.8
250 10 273.1 3.4 22.63 4.19 27.78 9.27 60.5 12.7 96 28.6 172.4 25.4 155.15
300 12 323.9 3.96 31.25 4.57 36 9.52 73.88 12.7 132 33.32 238.76 25.4 186.97
350 14 355.6 3.96 34.36 4.78 41.3 11.13 94.59 19.05 158.08 35.71 281.7 - -
400 16 406.4 4.19 41.56 4.78 47.29 12.7 123.3 21.41 203.33 40.46 365.11 - -
450 18 457.2 4.19 46.8 4.78 53.42 14.27 155.8 23.8 254.36 45.71 466.4 - -
500 20 508 4.78 59.25 5.54 68.71 15.09 183.42 26.19 311.2 49.99 564.68 - -
600 24 609.6 5.54 82.47 6.35 94.45 17.48 255.41 30.96 442.08 59.54 808.22 - -

Titanium Chemical and Mechnical Properties

CHEMICAL, PHYSICAL AND MECHANICAL PROPERTIES

CHEMICAL COMPOSITION

ASTM Grade

(Max. Values)

1

2

5

7

9

12

23

N, Nitrogen

0,03

0,03

0,05

0,03

0,02

0,03

0,03

C, Carbon

0,1

0,1

0,1

0,1

0,05

0,08

0,08

H, Hydrogen

0,015

0,015

0,0125

0,015

0,013

0,015

0,0125

Fe, Iron

0,2

0,3

0,4

0,3

0,25

0,3

0,25

O, Oxygen

0,18

0,25

0,20

0,25

0,12

0,25

0.13

Pd, Palladium

　

　

　

0,12-0,25

　

　

　

Al, Aluminum

　

　

5,5-6,75

　

2,5-3,5

　

5,5-6.5

Mo, Molybdenum

　

　

　

　

　

0,2-0,4

　

V, Vanadium

　

　

3,5-4,5

　

2,0-3,0

　

3,5-4,5

Ni, Nickel

　

　

　

　

　

0,6-0,9

　

Ti, Titanium

Bal.

Bal.

Bal.

Bal.

Bal.

Bal.

Bal.

MECHANICAL PROPERTIES

　

　

　

　

　

Tensile strength, min (Mpa)

240,00

345,00

895,00

345,00

620,00

483,00

828,00

Yield strength, 0,2% Offset, min (Mpa)

170,00

275,00

825,00

275,00

483,00

345,00

759,00

Elongation (in 4D, min, %)

24,00

20,00

10,00

20,00

15,00

18,00

10,00

Reduction of Area, min, %

30,00

30,00

25,00

30,00

25,00

25,00

15,00

Hardness * Interpolated

Rb70

Rb80

Rc36

Rb80

Rc28

Rc17*

　

Hastelloy Chemical Composition

Alloy* C% Co% Cr% Mo% V% W% Ai% Cu% Nb % Ti% Fe% Ni% Other%
Hastelloy B 0.1 1.25 0.6 28 0.3 - - - - - 5.5 rest/bal Mn 0.80; Si 0.70
Hastelloy B2 / Hastelloy B-2 0.02 1 1 26.0-30.0 - - - - - - 2 rest/bal Mn 1.0, Si 0.10
Hastelloy C 0.07 1.25 16 17 0.3 40 - - - - 5.75 rest/bal Mn 1.0; Si 0.70
Hastelloy C4 / Hastelloy C-4 0.015 2 14.0-18.0 14.0-17.0 - - - - - 0..70 3 rest/bal Mn 1.0 ; Si 0.08
Hastelloy C276 / Hastelloy C-276 0.02 2.5 14.0-16.5 15.0-17.0 0.35 3.0-4.5 - - - - 4.0-7.0 rest/bal Mn 1.0; Si 0.05
Hastelloy F 0.02 1.25 22 6.5 - 0.5 - - 2.1 - 21 rest/bal Mn 1.50; Si 0.50
Hastelloy G 0.05 2.5 21.0-23.5 5.5-7.5 - 1 - 1.5-2.5 1.7-2.5 - 18.0-21.0 rest/bal Mn 1.0-2.0; P0.04; Si 1.0; 
Hastelloy G2 / Hastelloy G-2 0.03 - 23.0-26.0 5.0-7.0 - - - 0.70-1.20 - 0.70-1.50 rest/bal 47.0-52.0 Mn 1.0; Si 1.0
Hastelloy N 0.06 0.25 7 16.5 - 0.2 - 0.1 - - 3 rest/bal Mn 0.40; Si 0.25; B 0.01
Hastelloy S 0.02 2 15.5 14.5 0.6 1 0.2 - - - 3 rest/bal Mn 0.50; Si 0.40; B0.0009; La 0.02
Hastelloy W 0.06 1.25 5 24.5 - - - - - - 5.5 rest/bal Mn 0.050; Si 0.50
Hastelloy X 0.1 1.5 22 9 - 0.6 - - - 18.5 - rest/bal Mn 0.6; Si 0.60